Microsoft MCTS Juniper Networks JN0-343

Microsoft MCTS Juniper Networks JN0-343

Access Routing and LAN Switching;Advanced Routing and Switching;APE;APE for Validating Knowledge;Architecture;
CCDA;CCDE; CCDP;CCENT;CCIE;CCIE Data Center;CCIP; CCNA;
CCNA Security;CCNA Wireless;CCNA Voice;CCNP;CCNP Data Center
;CCNP Service Provider; CCNP Wireless;CCNP Security;CCNP SP Operations; CCNP Voice;CCSP;CCVP;Cisco Express Foundation Field Specialist;Cisco Security Sales Specialist;Cisco Specialist;Cisco Virtual Classroom;Connected Grid;Content Networking;Data-Center;Field Technician;IP Communications;IronPort; Network Management; Optical;Others
;Proctored Exams for Validating Knowledge;Sales Expert; Security Specialist;Service Provider Video;SMB;SP Video
;Storage Networking; Substation Automation;TelePresence Video
;Unified Communications;VPN and Security; WAASSE; Wireless LAN

JN0-343 Juniper Networks Certified Internet Specialist (JNCIS-ENT) Der einfachste Weg für die IT-Prüfung vorzubereiten, ist die Praxis-Tests auf Zertifizierungsprüfung Muster zu nehmen und zu verstehen, die richtige sowie falsche Antwort Erklärungen Deine Zweifel klären. Lesen Sie dazu auch relevante technische Artikel zu versierter in der damit verbundenen Technologie.

Microsoft MCTS Juniper Networks JN0-343

QUESTION NO: 1
You want to ensure that all traffic arriving on interface fe-0/0/0.0 will be routed to next-hop
10.1.1.1, regardless of the more specific routes that might appear in the routing table. How can you accomplish this configuration?

A. Configure a default route with a next hop of 10.1.1.1 and configure the always-use flag for the route.
B. Configure and apply a firewall filter that sends all traffic to a routing instance, configure a default route in that routing instance, and configure the router to install interface routes in that routing instance.
C. Configure a routing policy that matches all traffic and sets the next hop to 10.1.1.1, and
configure a RIB group to ensure that the routing policy can resolve the next hop to 10.1.1.1.
D. Configure a firewall filter that matches all traffic and sets the next hop to 10.1.1.1, apply the firewall filter to a RIB group, and assign the fe-0/0/0.0 interface to that RIB group.

Answer: B

QUESTION NO: 2
Which statement describes the operation of a stub area?

A. A stub area receives only a default route.
B. A stub area receives all routes from all other areas.
C. A stub area receives no external routes from other areas.
D. A stub area is automatically configured based on the presence of the E-bit in the hello
messages sent from the ABR.

Answer: C

QUESTION NO: 3
Which configuration allows the virtual IP address to respond to pings?

A. [edit interfaces fe-0/0/0 unit 50 family inet address 192.168.0.12/24]
user@RouterA# show
vrrp-group 50 {
virtual-address 192.168.0.1;
fast-interval 250;
preempt;
accept-data;
}
B. [edit interfaces fe-0/0/0 unit 50 family inet address 192.168.0.12/24]
user@RouterA# show
vrrp-group 50 {
virtual-address 192.168.0.1;
fast-interval 250;
no-preempt;
no-accept-data;
}
C. [edit interfaces fe-0/0/0 unit 50 family inet address 192.168.0.12/24]
user@RouterA# show
vrrp-group 50 {
virtual-address 192.168.0.1;
fast-interval 250;
accept-icmp;
}
D. [edit interfaces fe-0/0/0 unit 50 family inet address 192.168.0.12/24]
user@RouterA# show
vrrp-group 50 {
virtual-address 192.168.0.1;
priority 220;
advertise-interval 10;
preempt;
accept-packets;
}

Answer: A

Microsoft MCTS Juniper Networks JN0-343

Die Kommentarfunktion ist geschlossen.