Microsoft MCTS 070-680 Microsoft

www.it-pruefungen.ch hilft Ihnen mit hochwertigenUnterlagen und Software, die Fragen und Antworten Zertifizierungsprüfung zu bestehen. Mit Hilfe der www.it-pruefungen.ch sind Sie sicher, die Zertifizierung mit einem hohen Punkt zu bestehen und den Erfolg im IT-Bereich erobern.

070-680 Windows 7,Configuring Vorbereitung für IT-Prüfung hat eine Reihe von spezialisierten Zertifizierungsprüfung im Zusammenhang mit einem bestimmten Gebiet, und so ist die Wahl der richtigen Training Produkt ist sehr wichtig.

Microsoft MCTS 070-680 Microsoft

QUESTION 1
You have a standalone computer that runs Windows 7. You need to prevent non-administrative users from using Device Manager. Users must be able to access Event Viewer.

What should you do?

A. From Control Panel, modify the default settings for media and devices.
B. From Control Panel, modify the default settings for device installation.
C. From the local computer policy, modify the application control policies.
D. From the local computer policy, modify the Microsoft Management Console (MMC) settings.

Answer: D

Explanation/Reference:
Controlling MMC usage by using local Group Policy
To control MMC usage by using local Group Policy
Open MMC 3.0.
On the File menu, click Add/Remove Snap-in.
In the Available snap-ins list, click the Group Policy editor, and then click Add.
In the Select Group Policy Object wizard, use the default setting, Local Computer, in the Group Policy Object field.
Click Finish to close the Select Group Policy Object wizard.
By default, all available snap-in extensions are enabled. If you want to enable only certain extensions, highlight the snap-in in the Selected snap-ins list, and then click Edit Extensions.
By default, snap-ins load as child objects of the Console Root node. Click Advanced to modify this behavior and allow you to choose a different parent snap-in.
In the Add or Remove Snap-ins dialog box, click OK.
Before closing the new console, perform any of these procedures:
- To restrict access to author mode in MMC
- To restrict access to a permitted list of snap-ins
- To permit or restrict access to a snap-in

QUESTION 2
You have a workgroup that contains five computers. The computers run Windows 7. A computer named Computer1 has video and audio files. You need to share Computer1’s video and audio files on the network.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A. Create a HomeGroup.
B. Move the files to a Media Library.
C. Enable all BranchCache rules in Windows Firewall.
D. Connect a removable drive and enable BitLocker To Go.

Answer: AB

Explanation/Reference:
HomeGroup Connections
This option decides how authentication works for connections to HomeGroup resources. If all computers in the HomeGroup have the same user name and passwords configured, you can set this option to allow Windows to manage HomeGroup connections. If different user accounts and passwords are present, you should configure the option to use user accounts and passwords to connect to other computers. This option is available only in the Home/Work network profile.

Media Library Sharing
Before you turn on Media Library Sharing for a shared folder, you should know that Media Library Sharing bypasses any type of user-account access that you set for the shared folder. For example, let’s say that you turn on Media Library Sharing for the Photos shared folder, and you set the Photos shared folder to No Access for a user account named Bobby. Bobby can still stream any digital media from the Photos shared folder to any supported digital media player or DMR. If you have digital media that you do not want to stream in this manner, store the files in a folder that does not have Media Library Sharing turned on.

If you turn on Media Library Sharing for a shared folder, any supported digital media player or DMR that can access your home network can also access your digital media in that shared folder. For example, if you have a wireless network and you have not secured it, anybody within range of your wireless network can potentially access your digital media in that folder. Before you turn on Media Library Sharing, make sure that you secure your wireless network. For more information, see the documentation for your wireless access point.

QUESTION 3
Your network has a main office and a branch office. The branch office has five client computers that run Windows 7. All servers are located in the main office. All servers have BranchCache enabled.
Users at the branch office report that it takes several minutes to open large files located in the main office.

You need to minimize the amount of time it takes for branch office users to open files located in the main office. The solution must also reduce the amount of bandwidth used between the two offices.

What should you do?

A. At the main office, configure the Quality of Service (QoS) Packet Scheduler on all servers.
B. At the main office, configure the servers to use Background Intelligent Transfer Service (BITS).
C. At the branch office, configure the client computers to use BranchCache Hosted Cache mode.
D. At the branch office, configure the client computers to use BranchCache Distributed Cache mode.

Answer: D

Microsoft MCTS 070-680 Microsoft

Microsoft MCTS 070-667 Microsoft

www.it-pruefungen.ch hilft Ihnen mit hochwertigenUnterlagen und Software, die Fragen und Antworten Zertifizierungsprüfung zu bestehen. Mit Hilfe der www.it-pruefungen.ch sind Sie sicher, die Zertifizierung mit einem hohen Punkt zu bestehen und den Erfolg im IT-Bereich erobern.

070-667 Microsoft SharePoint 2010, Configuring Vorbereitung für IT-Prüfung hat eine Reihe von spezialisierten Zertifizierungsprüfung im Zusammenhang mit einem bestimmten Gebiet, und so ist die Wahl der richtigen Training Produkt ist sehr wichtig.

Microsoft MCTS 070-667 Microsoft

1.Rate your level of proficiency with managing a SharePoint environment, including managing operational settings, accounts, user roles, and authentication providers.
A.Very high
B.High
C.Moderate
D.Low
E.Very low

Answer:A

2.Rate your level of proficiency with deploying and managing applications, including managing Web applications, site collections, and SharePoint solutions.
A.Very high
B.High
C.Moderate
D.Low
E.Very low

Answer:A

3.Rate your level of proficiency with maintaining a SharePoint environment, including backing up and restoring, monitoring and analyzing, and optimizing the performance of a SharePoint environment.
A.Very high
B.High
C.Moderate
D.Low
E.Very low

Answer:A

Microsoft MCTS 070-667 Microsoft

Microsoft MCTS 070-649 Microsoft

www.it-pruefungen.ch hilft Ihnen mit hochwertigenUnterlagen und Software, die Fragen und Antworten Zertifizierungsprüfung zu bestehen. Mit Hilfe der www.it-pruefungen.ch sind Sie sicher, die Zertifizierung mit einem hohen Punkt zu bestehen und den Erfolg im IT-Bereich erobern.

070-649 TS: Upgrading Your MCSE on Windows Server 2003 to Windows Server 2008, Technology Specialist Vorbereitung für IT-Prüfung hat eine Reihe von spezialisierten Zertifizierungsprüfung im Zusammenhang mit einem bestimmten Gebiet, und so ist die Wahl der richtigen Training Produkt ist sehr wichtig.

Microsoft MCTS 070-649 Microsoft

QUESTION 1
Your network contains a Network Load Balancing (NLB) cluster named NLB01. NLB01 contains two servers named Node1 and Node2 that run Windows Server 2008 R2. Node1 and Node2 are configured as shown in the following table:

You need to install Windows updates on Node1 to meet the following requirements:

· Prevent new connections to Node1 while the updates are installed.

· Provide connected users with the ability to complete their session on Node1 before the updates are installed.

What should you do first?

A. From Network Load Balancing Manager, right-click Model and click Drainstop
B. From Network Load Balancing Manager, right-click Node1 and click Suspend
C. From the Services console, right-click Workstation and click Pause.
D. From the Services console, right-click Server and click Pause.

Answer: A
Section: Network Load Balancing (NLB)

QUESTION 2
You manage a Web server named Server1 that runs Windows Server 2008 R2. Server1 hosts five Web sites.

You discover that the CPU utilization of Server1 is abnormally high.

You need to view the amount of CPU resources that each web site is using.

Which tool should you use?

A. Local Security Policy
B. Telnet
C. Services
D. windows Firewall
E. System Configuration
F. Ftp
G. Security Configuration Wizard (SCW)
H. Performance Monitor
I. Internet Information Services (IIS) Manager
J. Internet information services (IIS) 6.0 Manager
K. Component Services
L. lisreset

Answer: H
Section: Internet Information Server (IIS)

QUESTION 3
You manage a Web server named Server1 that runs Windows Server 2008 R2. Server1 has five application pools.

You need to recycle one application pool without affecting the other application pools.

Which tool should you use?

A. System Configuration
B. Iisreset
C. Component Services
D. Internet Information Services (IIS) 6.0 Manager
E. Internet Information Services (IIS) Manager
F. Local Security Policy
G. Windows Firewall
H. Ftp
I. Security Configuration Wizard (SCW)
J. Telnet
K. Performance Monitor
L. Services

Answer: E

Microsoft MCTS 070-649 Microsoft

Microsoft MCTS 070-642 Microsoft

www.it-pruefungen.ch hilft Ihnen mit hochwertigenUnterlagen und Software, die Fragen und Antworten Zertifizierungsprüfung zu bestehen. Mit Hilfe der www.it-pruefungen.ch sind Sie sicher, die Zertifizierung mit einem hohen Punkt zu bestehen und den Erfolg im IT-Bereich erobern.

070-642 TS: Windows Server 2008 Network Infrastructure, Configuring Certification Vorbereitung für IT-Prüfung hat eine Reihe von spezialisierten Zertifizierungsprüfung im Zusammenhang mit einem bestimmten Gebiet, und so ist die Wahl der richtigen Training Produkt ist sehr wichtig.

Microsoft MCTS 070-642 Microsoft

QUESTION 1
Your network contains two servers named Server1 and Server2 that run a Server Core
installation of Windows Server 2008 R2. Server1 has the SNMP Service installed. You need
to ensure that Server2 can send SNMP traps to Server1. What should you do?
A. On Server2, run dism /online /enable-feature /featurename:snmp-sc.
B. On Server1, run oclistsnmp-sc.
C. On Server2, run oclistsnmp-sc.
D. On Server1, run dism /online /enable-feature /featurename:snmp-sc.
Answer: A

QUESTION 2
Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1
contains two shared folders named Share 1 and Share2. The shared folders are located on
the same volume.
You need to prevent users from storing more that 100 MB of data in Share1 only.
What should you install on Server1?
A. File Server Resource Manager (FSRM)
B. Network Policy Server (NPS)
C. Services for Network File System (NFS)
D. Windows System Resource Manager (WSRM)
Answer: A
Explanation/Reference:
Reference: http://technet.microsoft.com/en-us/library/cc733029.aspx

QUESTION 3
Your network contains four servers named Server1, Server2, Server3, and Server4 that run
Windows Server 2008 R2. The servers have the Network Policy Server (NPS) role service
installed.
You configure a Remote RADIUS Server Group named Group1. Group 1 contains Server2,
Server3, and Server4.
You need to configure load balancing for the members of Group1 to meet the following
requirements:
· Server1 must send 25 percent of all authentication requests to Server3.
· Server1 must send 75 percent of all authentication requests to Server2.
· Server1 must only send authentication requests to Server4 if Server2 and Server3 are
unavailable.
What should you do from the Network Policy Server console?
A. · For Server2, set the weight to 75 and the priority to 75, · For Server3, set the weight to 25 and
the priority to 25.
·For Server4, set the weight to 100 and the priority to 200.
B. · For Server2, set the weight to 75 and the priority to 1.
· For Server3, set the weight to 25 and the priority to 1.
· For Server4, set the weight to 100 and the priority to 100.
C. · For Server2, set the weight to 1 and the priority to 75.
· For Server3, set the weight to 1 and the priority to 25.
· For Server4, set the weight to 100 and the priority to 1.
D. · For Server2, set the weight to 75 and the priority to 25.
· For Server3, set the weight to 25 and the priority to 75.
· For Server4, set the weight to 100 and the priority to 1.
Answer: B
Explanation/Reference:
Reference: http://technet.microsoft.com/en-us/library/dd197433(WS.10).aspx
Microsoft MCTS 070-642 Microsoft

Microsoft MCTS 070-516 Microsoft

www.it-pruefungen.ch hilft Ihnen mit hochwertigenUnterlagen und Software, die Fragen und Antworten Zertifizierungsprüfung zu bestehen. Mit Hilfe der www.it-pruefungen.ch sind Sie sicher, die Zertifizierung mit einem hohen Punkt zu bestehen und den Erfolg im IT-Bereich erobern.

070-516 TS: Accessing Data with Microsoft .NET Framework 4 Vorbereitung für IT-Prüfung hat eine Reihe von spezialisierten Zertifizierungsprüfung im Zusammenhang mit einem bestimmten Gebiet, und so ist die Wahl der richtigen Training Produkt ist sehr wichtig.

Microsoft MCTS 070-516 Microsoft

QUESTION 1
You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to develop an application.
You use the ADO.NET Entity Framework Designer to model entities.
You need to create a Plain Old CLR Object (POCO) class that can be used with the ObjectContext.CreateObject method to create a proxy.
What should you do?

A. Create a custom data class that has a Protected constructor that does not have parameters.
B. Create a custom data class in which all properties and methods are virtual.
C. Create a custom data class that is abstract.
D. Create a custom data class that is sealed.

Answer: A

Explanation/Reference:
Requirements for Creating POCO Proxies
(http://msdn.microsoft.com/en-us/library/dd468057.aspx)

QUESTION 2
You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to develop an ASP.NET Web application that uses the Entity Framework.

The build configuration is set to Release. The application must be published by using Microsoft Visual Studio 2010, with the following requirements:
The database schema must be created on the destination database server.
The Entity Framework connection string must be updated so that it refers to the destination database server.

You need to configure the application to meet the requirements. Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)

A. Generate the DDL from the Entity Framework Designer and include it in
the project. Set the action for the DDL to ApplicationDefinition.
B. Set Items to deploy in the Package/Publish Web tab to All files in this Project
Folder for the release configuration.
C. Use the web.config transform file to modify the connection string for the
release configuration.
D. Include the source database entry in the Package/Publish SQL tab and update the
connection string for the destination database.

Answer: CD

QUESTION 3
You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to develop an application.
You use the ADO.NET Entity Framework Designer to model entities.
You need to retrieve an entity, and you must ensure that the entity is loaded in a detached state.
Which MergeOption enumeration value should you use to retrieve the entity?

A. PreserveChanges
B. OverwriteChanges
C. AppendOnly
D. NoTracking

Answer: D

Microsoft MCTS 070-516 Microsoft

Microsoft MCTS 070-432 Microsoft

www.it-pruefungen.ch hilft Ihnen mit hochwertigenUnterlagen und Software, die Fragen und Antworten Zertifizierungsprüfung zu bestehen. Mit Hilfe der www.it-pruefungen.ch sind Sie sicher, die Zertifizierung mit einem hohen Punkt zu bestehen und den Erfolg im IT-Bereich erobern.

070-432 TS:MS SQL Server 2008,Implementation and Maintenance Vorbereitung für IT-Prüfung hat eine Reihe von spezialisierten Zertifizierungsprüfung im Zusammenhang mit einem bestimmten Gebiet, und so ist die Wahl der richtigen Training Produkt ist sehr wichtig.

Microsoft MCTS 070-432 Microsoft

QUESTION 1
You work in a company which is named Wiikigo Corp. The company uses SQL Server 2008. You are the administrator of the company database.

Now you are in charge of a SQL Server 2008 instance. There is a database developer who is named UserJack.

UserJack views the definitions of all database objects in a database to read data from all user-defined tables, views, and table-valued functions. For UserJack, you have to assign the required permissions.

Besides this, you must make sure that other developers can also be given the same permissions, but this should be achieved by executing as little Transact-SQL statements as possible.

In the options below, which Transact-SQL statements should you execute?

A. GRANT VIEW ANY DEFINITION TO UserJack;EXEC sp_addrolemember ‘db_datareader’, ‘UserJack’;
B. CREATE ROLE Developers;GRANT CONTROL TO Developers;EXEC sp_addrolemember ‘Developers’, ‘UserJack’;
C. CREATE ROLE Developers;GRANT VIEW DEFINITION TO Developers;GRANT SELECT TO Developers;EXEC sp_addrolemember ‘Developers’, ‘UserJack’;
D. CREATE ROLE Developers;EXEC sp_addrolemember ‘sp_dbdatareader’, ‘Developers’;EXEC sp_addrolemember ‘sp_dbddladmin’, ‘Developers’;EXEC sp_addrolemember ‘Developers’,
‘UserJack’;

Answer: C

Explanation/Reference:
Create ROLE: Roles are database-level securables. After you create a role, configure the database-level permissions of the role by using GRANT, DENY, and REVOKE. To add members to a database role, use the sp_addrolemember stored procedure.
VIEW DEFINITION:The VIEW DEFINITION permission lets a user see the metadata of the securable on which the permission is granted. However, VIEW DEFINITION permission does not confer access to the securable itself. For example, a user that is granted only VIEW DEFINITION permission on a table can see metadata related to the table in the sys.objects catalog view. However, without additional permissions such as SELECT or CONTROL, the user cannot read data from the table.
GRANT SELECT: Grants permissions on a securable to a principal.

QUESTION 2
You administer a SQL Server 2008 instance that contains a database named DB1.

A table named Sales.Table1 exists in the Sales schema.
You need to move the Sales.Table1 table to a new schema named Billing.

Which Transact-SQL statement should you execute?

A. ALTER SCHEMA Billing TRANSFER Sales.Table1;
B. ALTER USER Sales WITH DEFAULT_SCHEMA = Billing;
C. ALTER AUTHORIZATION ON Sales.Table1 TO Billing;
D. ALTER TABLE Sales.Table1 SWITCH TO Billing.Table1;

Answer: A

QUESTION 3
You work for a company which uses SQL Server 2008. You are the administrator of the
company database and in charge of three SQL Server 2008 instances.

All the instances run on their independent server. The three instances are respectively named InstanceA, InstanceB, and InstanceC. Between InstanceA and InstanceB, you configure a mirroring mission-critcal database. InstanceA currently acts as the Principal and InstanceC acts as the witness. You intend to apply a patch to both servers as soon as possible, the patch needs to restart the server. You must make sure that the database is online on the partner that currently does not apply the patch and during this time the database does not failover to the other partner.

So what action should you perform to achieve this goal?

A. First, you should stop the mirroring session. Second you apply the patch to the server that
runs InstanceB. Third, you should resume the mirroring session. Fourth, you should manually
failover the mirroring session. At last, you should apply the patch to the server that runs
Instance1.
B. First, you should apply the patch to the server that runs InstanceB. Second you apply the
patch to the server that runs InstanceA.
C. First, you should apply the patch to the server that runs InstanceB. Second you failover
the mirroring session manually. At last apply the patch to the server that runs InstanceA
D. First, you should remove the mirroring session. Second you apply the patch to the server
that runs InstanceB. Third, you should apply the patch to the server that runs Instance1. At
last re-establish the mirroring session.

Answer: A

Microsoft MCTS 070-432 Microsoft